tracking pixel
 
Like us on facebook for more info on our Air Conditioner repair service in Denver CO
For Air Conditioner repair in Aurors CO, visit us on Google!
To schedule your Plumbing installation in Evergreen CO, just email us!
Call Blue Sky Plumbing & Heating for great Air Conditioner repair service in Denver CO
(303) 421-2161
Serving all of the Denver Metro Area
 
   Heating    |       Air Conditioning    |       Plumbing    |       Boilers
Call Blue Sky Plumbing & Heating for great Air Conditioner repair service in Denver CO
(303) 421-2161

Installing Insulation on an Electric Hot Water Heater

Installing an Insulation Blanket on an Electric Water Heater

Note: Installation is more difficult on gas and oil-fired heaters. Ask a qualified HVAC contractor for instructions.

  1. Cut the tank top insulation to fit around the piping in the top of the tank. Tape the cut section closed after the top has been installed.
  2. Fold the corners of the tank top insulation down and tape to the sides of the tank.
  3. Position the insulating blanket around the circumference of the tank. For ease of installation, position the blanket so that the ends do not come together over the access panels in the side of the tank. Some tanks have only one access panel.
  4. Secure the blanket in place with the belts provided. Position the belts so they do not go over the access panels (Figure 2). Belts should fit snugly over the blanket but not compress it more than 15% to 20% of its thickness. The installation is easier with two people. If working alone, use tape to hold the blanket to the top until you get the belts into position.
  5. If your water heater has the temperature/ pressure relief valve and the overflow pipe on the side of the tank instead of on the top, install the blanket so these items are outside of the blanket. Depending on the piping arrangement and location, you may need to compress, or even cut, the blanket.
  6. Locate the four corners of the access panel(s). Make an x-shaped cut in the insulating blanket from corner to corner of each access panel.
  7. Fold the triangular flaps produced by the cuts underneath the insulating blanket. Repeat steps 6 and 7 for the rating/ instruction plate.
  8. The blanket must not be installed on a leaking tank.

© Online-Access

Service 365 Days a Year • Call (303) 421-2161 • or • Fill Out Our Online Form
Service 365 Days a Year
Call Us Today
(303) 421-2161
Fill Out Our Online Form
Map & Directions
 

Get In Touch
 
Address:   4765 Independence Street
Wheat Ridge, CO 80033
Phone:   (303) 421-2161
Connect With Us
 
Payment Options
 
For Air Conditioner repair service in Denver CO, we accept most major credit cards.
 
We accept cash for Cooling repair service provided in Evergreen CO.
We accept check for Plumbing repair service provided in Aurors CO.
 
Schedule an Appointment
Search Our Website
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Ask a Tech   |   Maintenance   |   Employment   |   Privacy Policy